The Chatillon DFS-R Series supplies accurate load
measurement up to 1000 lbf, 5 kN. Ideal for handheld or test stand
applications, measurement accuracy is better than +/-0.1% Full Scale. A large,
easy-to-read, high resolution dot matrix LCD display supports a variety of
standard gauge functions including normal and peak readings, high/low
limits, set points, pass/fail results, statistical results, load averaging,
load comparisons, % and sharp break detection, sensor actuation and
direction. Measurements are displayed in ozf, gf, lbf, kgf and N units.
The DFS-R gauge comes standard with RS-232 cable, carrying case, battery
adapter and charger, and NIST Certificate of Calibration with data.
Uncertainty data per ISO/IEC 17025 is supplied standard with sensors. The
DFS-R gauge is supplied with NEXYGEN DF Series
Software.
Standard Gauge Measurement Functions
Normal Tensile, Compression and Torque Measurement
Peak Tension, Compression and Torque Measurement
Sharp and % Break Detection
Contact Closure
Pass-Fail Limits
High & Low Set Point Limits
Load Comparison
Statistical Calculations
Model
ozf
gf
lbf
kgf
N
DFS-R-250G
8 x
0.002
250 x 0.05
0.5 x
0.0001
0.25 x 0.0001
2.5 x
0.0005
DFS-R-0002
32 x
0.005
1000 x 0.1
2 x
0.0002
1
x 0.0001
10 x
0.001
DFS-R-0010
160 x
0.02
5000 x 0.5
10 x
0.001
5
x 0.0005
50 x
0.005
DFS-R-0025
400 x
0.05
10000 x 1
25 x
0.002
10
x 0.001
100 x
0.01
DFS-R-0050
800 x
0.1
25000 x 2
50 x
0.005
25
x 0.002
250 x
0.02
DFS-R-0100
1600
x 0.2
50000 x 5
100 x
0.01
50
x 0.005
500 x
0.05
DFS-R-0200
-
-
200 x
0.02
100 x 0.01
1000
x 0.1
DFS-R-0500
-
-
500 x
0.05
250 x 0.02
2500
x 0.2
DFS-R-1000
-
-
1000
x 0.1
500 x 0.05
5000
x 0.5
Common
Accessories
Type
Part No.
Cap.
Thread
Mates To
Standard
Chisel Point
SPK-FMG-008A
100 lbf
#10-32F
#10-32M
Option
Point
SPK-FMG-009A
100 lbf
#10-32F
#10-32M
Option
Notch
SPK-FMG-010A
100 lbf
#10-32F
#10-32M
Option
Flat
SPK-FMG-011A
100 lbf
#10-32F
#10-32M
Yes
Hook
SPK-FMG-012A
50 lbf
#10-32F
#10-32M
Yes
Hook
SPK-FMG-012B
100 lbf
#10-32F
#10-32M
Yes
Extension Rod
SPK-FMG-013A
100 lbf
#10-32F
#10-32M
Option
Chisel Point
SPK-FMG-008B
500 lbf
5/16-18F
5/16-18M
Option
Point
SPK-FMG-009B
500 lbf
5/16-18F
5/16-18M
Option
Notch
SPK-FMG-010B
500 lbf
5/16-18F
5/16-18M
Option
Flat
SPK-FMG-011B
500 lbf
5/16-18F
5/16-18M
Yes
Hook
SPK-FMG-012C
500 lbf
5/16-18F
5/16-18M
Yes
Extension Rod
SPK-FMG-013B
500 lbf
5/16-18F
5/16-18M
Option
Battery Charger, 120V
SPK-DF-US120
US Plug
Yes
Battery Charger, 230V
SPK-DF-UK230
UK Plug
Yes
Battery Charger, 230V
SPK-DF-UK230
EU Plug
Yes
Carrying Case
SPK-DF-118
Yes
DF Series
gauges having a capacity of 100 lbf or below have a #10-32M thread. DF
Series gauges with capacities over 100 lbf have a 5/16-18M. Accessories are
capacity dependent-only one accessory of a like type is supplied based on
the force gauge capacity ordered.
|
|
|
|
